Power Supply Trip Reasons and Treatments

4 Furnace-Related Power Supply Trip Reasons and Treatments

Tripped circuit breakers can be troublesome and frustrating, especially if it seems that the furnace is to blame. There is no immediate cause for panic if your breaker trips once and then resumes functioning regularly after you reset it. A random power spike is typically the root of this problem.

But if the breaker keeps being thrown, the issue must be addressed. Gas and electric furnaces also run the risk of this happening. After all, gas-fired furnaces require power to run the blower motor and other parts. Before making an appointment for furnace repair, please review the most common reasons why circuit breakers from furnaces trip and how to prevent them.

1. An overheated furnace

Does your furnace only operate for a short period before you have to shut off the breaker? This may indicate less airflow. A clogged filter or constrained vents make your furnace work harder. Due to the increased electrical demand, the system could overheat, strain the circuit, and trip the breaker. Try the following advice to solve the problem and restore steady airflow:

• Change your air filter.

• Open all of the air registers to make sure furnishings, drapes, or carpeting obstruct none.

• Avoid positioning anything against the furnace to obstruct the airflow.

2. Floating Circuit

Even though it should, older homes might not have HVAC equipment on a separate circuit. To determine if your furnace is linked to a course that also serves other equipment, look at the labeling on your electrical panel. Unplugging the secondary item will prevent you from utilizing it while the furnace is on. Employing an electrician to install a separate circuit for your HVAC system is safer and more durable.

3. A short circuit or ground fault

Does the circuit breaker trip when the furnace first turns on? This may indicate that the stove has an electrical problem. An exposed wire may short out the circuit or cause a ground fault if it comes into contact with a neutral wire, a grounded wire, or another metal object. The electrical draw can be spiked and the circuit opened by either of these items. It is best to engage with an HVAC specialist like HVAC Repair Guide Experts to locate and resolve the issue.

4. The electricity panel is malfunctioning.

If furnace-related problems are ruled out, the electrical panel can be the problem. Defective breakers or unstable connections may be the root of poor performance. If you live in an older home, you might need to have the panel changed if it is too old, broken, or improperly installed. In this circumstance, an electrician is required.

Your furnace may trip the circuit breaker even if you attempt to address the problem yourself. If this happens, turn off the stove and seek advice from the HVAC Repair Guide's professionals. Our HVAC specialists can advise on problems to solve and repairs to recommend. We provide a 12-month 100% Satisfaction Guarantee because we take pride in our work.